  
|
|
When performing any of the
following actions DO NOT go slowly.
If you make a mistake wait 8 seconds and try again.
|
| Changing
Mater code: |
Old Master code+
[802] + new master code two times in a row. |
|
|
| Add
a User Code: |
System Master
Code + [8] + User Number + New User's Code |
|
User 03 - 30 =
Standard Users |
|
The Keypad beeps
once to confirm that new user was added |
|
The user number
must be a 2 digit number (e.g. 03, 04, 06, etc) |
|
|
| Delete
User Code: |
System Master
Code + [8] + User Number + [#] + [0] |
|
|
| Chimes: |
System Master
Code + [9] |
|
|
| Bypassing: |
System
Master Code + [6] + zone number |
|
Enter the 2 digit
zone number(s) for the zone(s) to be bypassed |
|
(e.g. 06, 10, 13,
etc). Single
digit zone numbers must be preceded |
|
by a zero |
|
|
|
When finished,
the keypad will momentarily display a "Bypass" |
|
message for each
zone bypassed zone number. Wait for all |
|
bypassed zone to
be displayed. Arm the system as usual. |
|
Next time the
system is disarmed the bypass is cleared. |
|
|
| Clearing
Alarm: |
To clear an alarm
from your screen, simply enter your code |
|
and press off
again. |
